INITIO CORPORATION

INI-9100U

Data Bus                32-bit PCI
Card Size               Quarter-length, full-height card
Hard Drives supported   Up to 7 SCSI devices
Floppy drives supported None

[Image]

                                CONNECTIONS

        Function           Location          Function           Location

  50-pin SCSI connector       J1      4-pin connector -            J3
  - internal                          drive active LED

  50-pin SCSI connector       J2
  - external

                        USER CONFIGURABLE SETTINGS

                  Function                      Label        Position

  »    Host adapter is only one in system        JP1           Open

       Host adapter shares SCSI bus with         JP1          Closed
       adapter in another computer

            Note: Closing jumper JP1 sets active termination so it is
            always on. The setting is used when the adapter shares the
            SCSI bus with an adapter in another computer. If that
            computer can be turned off, closing the jumper will insure
            that active on-board termination is on all the time,
            regardless of whether power is applied or not.